Remember that plans are not necessarily "as is." Builders can use a reverse set of plans (sometimes called a mirror image) to better site a house. It's also possible to hire an architect or modification service to personalize a plan. Ask if reproducible prints or electronic CADD files are available for the selected plan. Either will make the alteration process quicker and easier.
One item to look for when evaluating a house plans' quality level is the number of structural sections which are shown on the plan. Highly detailed sets of plans will always cut lots of sectional views through the house to show every different roof framing situation. This might mean that 10 or 12 (or even more) sections need to be drawn for a large house plan. And even a small house plan should include 3 or 4 sections minimum. However, many home plans available today (especially plans purchased through inexpensive plan directories) cut corners in this department and only show one or two house section views. This means that the builder will have to guess at the rest of the house framing.
Square one : The real estate agent's mantra "location, location, location" rings true even when you're building from scratch. From privacy to orientation, your lot is likely to influence which plan you choose. "Theoretically, it's best to start by finding a lot because then you'll have a clear idea of what square footage will and will not fit on the property," says Robert Martin, Architecture Editor at Southern Living. "It's a dangerous proposition to try to gooseneck a house into a lot that's really not ideal for that plan."
Why do this, since even stock plans cost you at least a couple of hundred dollars each? Because the right stock plans can save you tons of time and money if you have a talented architect. Most plans are at least partly modular these days, and often you can even order prefabricated sections pegged to a specific house plan.