One item to look for when evaluating a house plans' quality level is the number of structural sections which are shown on the plan. Highly detailed sets of plans will always cut lots of sectional views through the house to show every different roof framing situation. This might mean that 10 or 12 (or even more) sections need to be drawn for a large house plan. And even a small house plan should include 3 or 4 sections minimum. However, many home plans available today (especially plans purchased through inexpensive plan directories) cut corners in this department and only show one or two house section views. This means that the builder will have to guess at the rest of the house framing.
"Some communities promote close neighbors, and some communities promote more breathing space," Martin says. "It's not wise to use up every square foot of building space because you'll have less of a yard." If the lot is located in a suburban neighborhood, consider the placement of windows - take care that they will not align exactly with neighbors' views. Driveways should also be taken into account to make sure that there's plenty of room for parking and turning around.
Some small homes have two floors and come with or without a basement. Some more common small homes have crawlspaces for extra storage. Traditionally they have a room off the kitchen which you can place a washer and dryer. These house are frequently Cottage or Bungalow style.
Craftsman style homes are characterized by the use of natural materials like wood or stone for exterior walls, and rock foundations that slope out towards the ground. They may also include dormers, exposed beams, and overhanging eaves. A two bedroom one bath house in the craftsman style will cost between $52,000.00 and $62,000.00 to build a two bedroom, two bath, home with a 2 car garage will run about $96.000.00.