Every set of custom house plans includes several items which need to be blown up and detailed for further clarification. If a set of plans does not provide additional close-up drawings (for things such as beam connections, deck railings, stairway construction, etc.), then it is not a complete set. It is very easy to cut corners during the planning process. But the end result will be higher costs for the home owner - and lots of frustration for the building contractor.
Remember that plans are not necessarily "as is." Builders can use a reverse set of plans (sometimes called a mirror image) to better site a house. It's also possible to hire an architect or modification service to personalize a plan. Ask if reproducible prints or electronic CADD files are available for the selected plan. Either will make the alteration process quicker and easier.
One item to look for when evaluating a house plans' quality level is the number of structural sections which are shown on the plan. Highly detailed sets of plans will always cut lots of sectional views through the house to show every different roof framing situation. This might mean that 10 or 12 (or even more) sections need to be drawn for a large house plan. And even a small house plan should include 3 or 4 sections minimum. However, many home plans available today (especially plans purchased through inexpensive plan directories) cut corners in this department and only show one or two house section views. This means that the builder will have to guess at the rest of the house framing.
Large front porches, dormers and a roofline that lies parallel to the road are the main distinguishing features of Country homes. Farm house and French Country plans can also be included in this category. Open floor plans are not common to this type of house. A small country home, 576 square feet, with one bath and two bedrooms, can be built for under $60,000.00 can be erected on your site for under $60,000.00. A three bedroom, 1 and ½ baths, will average about $84,000.00 to erect on your site.